Remove the cutting pad from the buffer, and then install a polishing pad on
the buffer.
Apply 4 evenly spaced 20 mm diameter dollops of polishing compound on the
polishing pad.
Set the buffer speed according to region, and while the buffer is off, place
the tool on top of the affected area.
NA:
12V Power- Disconnect
SPECIAL TOOLS
Cap, Logic Conn, Inv, 3DU (1108272-00-B)
Warning: This procedure disables 12V power, but does not verify that
high voltage power is no longer available to high voltage components (PTC heater,
A/C compressor, inverters, etc). Perform
Vehicle Electrical Isolati