Tesla Model 3 Owners & Service Manuals

Tesla Model 3: Trim - Package Tray (Remove and Install) - Remove

Tesla Model 3 2017-2024 Service Manual / Interior Trim / Luggage Compartment Trim / Trim - Package Tray (Remove and Install) / Trim - Package Tray (Remove and Install) - Remove

Trim - Package Tray (Remove and Install)

Remove

  1. Remove the 2nd row lower seat cushion. See Seat Cushion - Lower - 2nd Row (Remove and Replace).
  2. Remove the LH 2nd row seat side bolster. See Bolster - Side - Seat - 2nd Row - LH (Remove and Replace).
  3. Remove the LH side rail trim. See Trim - Side Rail - LH (Remove and Replace).
  4. Remove the LH upper C-pillar trim. See Trim - C-Pillar - Upper - LH (Remove and Replace).
  5. Remove the LH rear C-pillar trim. See Trim - C-Pillar - Rear - LH (Remove and Replace).
  6. Remove the RH 2nd row seat side bolster. See Bolster - Side - Seat - 2nd Row - LH (Remove and Replace).
  7. Remove the RH side rail trim. See Trim - Side Rail - LH (Remove and Install).
  8. Remove the RH rear C-pillar trim. See Trim - C-Pillar - Rear - LH (Remove and Replace).

Trim - Package Tray (Remove and Install)- Remove

  1. Release the clips that attach the package tray wiring harness to the C-pillar.

Trim - Package Tray (Remove and Install)- Remove

  1. Disconnect the package tray harness connector from the RH body electrical harness.

Trim - Package Tray (Remove and Install)- Remove

  1. Release the clip that attaches the speaker wiring harness to the tuner.

Trim - Package Tray (Remove and Install)- Remove

  1. Disconnect the speaker harness connector from the tuner.

Trim - Package Tray (Remove and Install)- Remove

  1. Release the clip that attaches the antenna amplifier wiring harness to the body.

Trim - Package Tray (Remove and Install)- Remove

  1. Disconnect the electrical connector from the antenna amplifier.

Trim - Package Tray (Remove and Install)- Remove

  1. Release the clips that attach the package tray trim to the body.

Trim - Package Tray (Remove and Install)- Remove

  1. Release the tabs that attach the package tray trim to the body, and then slide the package tray forward to remove it from the vehicle.

    READ NEXT:

     Trim - Package Tray (Remove and Install) -  Install

    Install Install the package tray trim to the vehicle. Note: Slide the package tray rearwards to install it to the vehicle, and then attach the package tray to the body with tabs. Install t

     Underhood Storage Unit (Remove and Replace)

     Underhood Storage Unit (Remove and Replace) - Remove

    Remove Remove the rear underhood apron. See Underhood Apron - Rear (Remove and Replace). Remove the cabin intake duct. See Duct - Cabin Intake (Remove and Replace). Remove the hood latch cove

    SEE MORE:

     Bracket - Hinge - Seat Back - 2nd Row - LH (Remove and Replace)

    Remove Remove the 2nd row lower seat cushion. See Seat Cushion - Lower - 2nd Row (Remove and Replace). Remove the LH 2nd row seat side bolster. See Bolster - Side - Seat - 2nd Row - LH (Remove and Replace). Remove the LH 2nd row seat back. See Seat Back - 2nd Row - LH (Remove and Install).

     Harness - AC Inlet - HV Battery- Install

    Install Use an IPA wipe to clean the mating surfaces of the positive ring terminal to the positive busbar, and the negative ring terminal to the negative busbar. Install the HV battery fast charge contactor cover onto the HV battery fast charge contactor, and fasten the clips (x8) that

    © 2019-2024 Copyright www.tmodel3.com