Tesla Model 3: Pivot Sleeve - Seat Back - 2nd Row - LH (Remove and Replace)
Tesla Model 3 2017-2025 Service Manual / Seats / 2nd Row Seat Assemblies and Hardware / Pivot Sleeve - Seat Back - 2nd Row - LH (Remove and Replace)
Remove
- Remove the 2nd row LH seat back assembly. See Seat Back - 2nd Row - LH (Remove and Install).
- Release the tabs that attach the pivot sleeve to the seat back assembly pivot pin, and then remove the sleeve from the pin.
READ NEXT:
Rail - 2nd Row - Inner - LH (Remove and Replace)
Remove
Remove the 2nd row lower seat cushion. See
Seat Cushion - Lower - 2nd Row (Remove and Replace).
Remove the 2nd row buckle assembly:
LH: See
Buckle - 2nd Row - LH (Remove and Replace)
Rail - 2nd Row - Outer - LH (Remove and Replace)
Remove
Remove the 2nd row lower seat cushion. See
Seat Cushion - Lower - 2nd Row (Remove and Replace).
Remove the bolts that attach the outer 2nd row rail to the body, and
then remove th
Seat Back - 2nd Row - LH (Remove and Install)
Remove
Remove the 2nd row lower seat cushion. See
Seat Cushion - Lower - 2nd Row (Remove and Replace).
Remove the LH 2nd row seat side bolster. See
Bolster - Side - Seat - 2nd Row - LH (Remove
SEE MORE:
Vehicle Electrical Isolation Procedure
SPECIAL TOOLS
Insulation Multimeter, Fluke 1507 (1076921-00-B)
Test Probes, Slim, Fluke TP38 (1130480-00-A)
Warning: This procedure verifies that high voltage power is no
longer available to high voltage components (PTC heater, A/C compressor,
inverters, etc). Perform this procedure before servici
Inverter Coolant Leak Test
DRAFT
Warning:
This procedure was derived from pre-production computer
models, and might not reflect the real-world situation. Warnings
and cautions might be missing. Follow safety requirements and
use extreme caution when working on or near high voltage s
© 2019-2025 Copyright www.tmodel3.com
