Tesla Model 3 Owners & Service Manuals

Tesla Model 3: Brake Pad Kit - Front (Sport Brakes)- Remove

Tesla Model 3 2017-2024 Service Manual / Brakes / Brake Discs and Calipers / Brake Pad Kit - Front (Sport Brakes) (Remove and Replace) / Brake Pad Kit - Front (Sport Brakes)- Remove

Brake Pad Kit - Front (Sport Brakes) (Remove and Replace)

Remove

  1. Raise and support the vehicle. See Raise Vehicle - 2 Post Lift.
  2. Remove the LH front wheel. See Wheel (Remove and Install).

  Brake Pad Kit - Front (Sport Brakes)- Remove

  1. Remove the bolt that attaches the LH front brake hose bracket to the LH front knuckle.

  Brake Pad Kit - Front (Sport Brakes)- Remove

  1. Remove and discard the bolts that attach the LH front brake caliper to the LH front knuckle.
  2. Use a brake caliper S-hook to hang the LH front caliper on the body.
  3. Use a caliper spreader kit or similar tool to gently spread the brake pads apart.

  Brake Pad Kit - Front (Sport Brakes)- Remove

  1. Gently use a plastic trim tool to remove the brake pads from the LH front brake caliper.
  2. Repeat step 2 through step 7 to remove the RH front brake pads.

    READ NEXT:

     Brake Pad Kit - Front (Sport Brakes)- Install

    Install Brush the LH front brake caliper and anti rattle springs with soapy water.  

     Brake Pad Kit - Rear (Base Brakes) (Remove and Replace)

      SPECIAL TOOLS Kit, EPB Release, Handheld (1134520-00-A) XP-10 Power Supply, XP-10 (

     Brake Pad Kit - Rear (Sport Brakes) (Remove and Replace)

    SEE MORE:

     Panel - Door Trim - Rear - LH (Remove and Install) - Install

    Install Inspect the condition of the LH rear door and the LH rear door trim panel. Replace any broken clips and repair any damage. Bring the trim panel to the door, and rest it on the door edge. Fasten the clip that attaches the electrical wiring harness to the trim panel. Connect

     Adjust Front Camber and Caster

    If the front camber and caster are within specification and do not require adjustment, adjust the front toe. See Adjust Front Toe. Remove the cowl screen panel. See Panel - Cowl Screen (Remove and Replace). Mark the location of the LH FUCA mount bolts by drawing a circle around each. Note

    © 2019-2024 Copyright www.tmodel3.com