Tesla Model 3: Adjustment

 Actuator - Intake (Remove and Replace)

Remove Remove the HVAC assembly. See HVAC Assembly (Remove and Replace). Disconnect the electrical harness from the intake actuator connector. Remove the screws (x2) that attach the intake actuator to the HVAC module, and then remove the actuator from the HVAC module. Torque 1.2 N

 Door - Rear - LH (Remove and Install)

Door - Rear - LH (Remove) Remove Open the rear LH door, and fully lower the window. Pass a shop towel halfway through the striker, and close the door so that it rests against the shop towel. Open the front LH door. Release the clips (x4) of the rear LH door electrical harness seal at